Custom Curtains vs Custom Drapery: What's the Difference?

What's the difference between curtains and drapes? Curtains are usually lighter, unlined panels in standard lengths that hang from a rod pocket or grommets. Drapery is lined, pleated, and made to fit your exact window. When you weigh custom curtains vs custom drapery, the real question is how much light control, insulation, and polish the room needs. This guide compares them side by side and room by room, so you can choose with confidence.

Family-owned since 1995 · 30+ years in Kansas City · Hunter Douglas dealer · 4.9 stars from 1,500+ Google reviews

Custom Curtains vs Custom Drapery: Side by Side

The difference between curtains and drapes comes down to construction. In everyday speech, the words get swapped all the time, and that’s fine. But when we design for a room, these are the points that change how the window looks and works.

 

Curtains

Drapery

Fabric

Lighter cottons, linens, sheers and blends

Medium to heavy fabrics, including velvets, silks and textured weaves

Lining

Usually unlined or lightly lined

Lined as standard: privacy, blackout or thermal, sometimes interlined

Top (heading)

Rod pocket, grommet or tab

Pinch, Euro, inverted or goblet pleats, or Ripplefold

Fullness when closed

Often about 1.5 times the width, so ready-made panels can look flat

About 2 to 2.5 times the width, for deep, even folds

Length

Ready-made in 63, 84, 96 and 108 inches

Made to your measured length: floor kiss, break or puddle

Hardware

A decorative rod or pole

Rings on a decorative rod, a traverse rod, a track or a motor

Light control

Filters light; light slips over the top and around the edges

Blocks more light, especially with blackout lining and returns to the wall

Insulation

Minimal

Lined and interlined panels help with drafts and summer heat

Care

Often machine washable (linen can shrink)

Usually dry clean or vacuum; lining protects the face fabric

How long they last

A few years in strong sun

Many years, because the lining takes the sun

Fullness ratios follow standard drapery workroom guidelines.

A simple way to remember it: curtains are casual and made to a standard size, while drapery is tailored and made to your window. A custom curtain still fits your window exactly. It just keeps the lighter fabric and simpler top of a curtain.

Which One Fits Your Room?

When Curtains Make Sense

  • Rooms where you want light, not darkness: a breakfast nook, a sunroom or a kitchen window over the sink.
  • Sheers layered under drapery or over a shade: they soften daylight and keep a view.
  • Casual spaces: a kid’s playroom, a basement family room or a lake house where washable fabric matters.
  • Panels that rarely move: a rod pocket curtain that stays put as a frame.

When Drapery Makes Sense

  • Bedrooms and nurseries: blackout-lined working drapery is one of the most reliable ways to darken a room.
  • Living and dining rooms: pleats and a lined hang give the room a finished, tailored look.
  • Tall windows and walls of glass: made-to-measure lengths and Ripplefold on a track handle widths that ready-made panels can’t.
  • Drafty or sunny windows: thermal lining or interlining helps with winter drafts and summer heat.
  • Patio doors: drapery on a track draws to one side and stacks off the door.

Custom Curtains vs Ready-Made: Is Custom Worth It?

Not always, and we’ll tell you so. For a rental, a laundry room or a quick fix, ready-made panels are often the sensible choice.

Custom pays off when ready-made panels cause the problems we hear about most:

  • They look skimpy. A pair of stock panels often doesn’t have enough fabric to close fully, so it lies flat instead of falling in folds.
  • They’re too short or too long. Stock lengths rarely land right at the floor, so panels end up hovering above it or bunching on it.
  • They shrink. Unlined linen and cotton panels can shrink after washing.
  • They leak light. Grommet tops let light in above the rod and don’t stack neatly when open.

Custom drapery fixes all four, because it’s made to your window’s exact width and length and lined to protect the fabric. That’s why many homeowners who search for custom curtains near them end up choosing custom drapery.

What Goes Into Our Custom Curtains and Drapery

Fabrics

Most of our custom work is made by Carole Fabrics, the Hunter Douglas drapery company. We also carry the Drake fabric line. You can make a custom curtain or custom drapery from the same fabric. The difference is in how it’s built: lining, heading, and fullness.

Linings

  • Privacy lining protects the face fabric from sun and gives a fuller hang.
  • Blackout lining blocks light coming through the fabric. Our Blackout Curtains guide explains how to stop light at the edges too.
  • Thermal lining or interlining adds body and helps with drafts and heat.

Headings

Curtains use a rod pocket, grommets or tabs. Drapery uses sewn pleats or Ripplefold, which hold their shape and stack neatly when open. For a full guide to pinch, Euro, inverted, goblet and Ripplefold headings, see Custom Drapery Styles.

Hardware

We carry four hardware lines: Carole, Kirsch, Aria and Select. A curtain usually hangs on a simple decorative rod. Drapery often needs more:

  • Traverse rods draw panels with a cord or wand, so you never tug on the fabric. The Kirsch Architrac corded traverse rod carries panels up to 80 lb.
  • Tracks carry Ripplefold drapery across wide windows and patio doors.
  • Motorized tracks open and close drapery from a remote, an app, or a schedule.

Heavy, lined panels need hardware rated for the weight, with center supports on long spans. Undersized rods are a common reason drapery sags or drags.

Curtains and Drapes in Kansas City Homes

Kansas City weather makes the choice more practical than it looks. Summers bring hard afternoon sun on west-facing glass, and winters bring drafts on older windows.

  • Older homes in Brookside, Waldo and Armour Hills: original windows can be drafty. Interlined drapery mounted above the trim adds warmth without hiding the woodwork.
  • Johnson County great rooms in Overland Park, Leawood and Olathe: tall, wide glass needs made-to-measure lengths. Ripplefold on a track handles the width, and lined panels cut glare and fading.
  • Newer homes in Lee’s Summit and the Northland: open floor plans look best with one heading style repeated room to room. Sheer curtains in a casual space can pair with matching drapery in the living room.
  • Bedrooms for shift workers and light sleepers: blackout-lined drapery mounted high and wide, layered over a shade, gives the darkest result.

What We Check Before Recommending Curtains or Drapery

A consultation starts with how you live in the room, then the window itself. Our designers look at:

  1. What the window has to do: darken, filter light, add privacy, or simply frame a view.
  2. Which way it faces: west and south windows need lining to protect the fabric and hold back heat.
  3. Ceiling height and wall space: these set the rod height and how much room panels have to stack when open.
  4. How often you’ll open them: stationary panels, a hand-drawn rod, or a track.
  5. What’s already on the window: shutters or shades the fabric has to clear.
  6. Kids, pets and cleaning: washable curtains in a mudroom, drapery that clears the floor where a dog sleeps.

Our team is led by Brandon Roellchen, president and second-generation owner of our family business, which has been designing windows across Kansas City since 1995.

Are Drapes More Expensive Than Curtains?

Usually, yes. Drapery uses more fabric, adds lining and sewn pleats, and often needs sturdier hardware. What moves the price most:

  • Fabric and yardage: fuller panels and large pattern repeats need more yards.
  • Lining: blackout, thermal, and interlining add material and sewing time.
  • Heading: sewn pleats take more workmanship than a rod pocket or grommet.
  • Size: floor-to-ceiling panels in a two-story room use far more fabric than a standard window.
  • Hardware and motorization: a traverse rod, track or motor costs more than a simple pole.

After measuring, we give you a written proposal for every window. For typical ranges, see our window treatment cost guide.

Warranty and Service

Why Choose One Stop Decorating

  • See and touch it first. Our showrooms in Overland Park, Shawnee, and Lee’s Summit let you compare curtain and drapery fabrics, linings, and hardware side by side. In the Northland, we bring them to your home.
  • One plan for the whole window. We design the fabric, the shade under it, and the hardware together, so every layer fits.
  • Measured and installed by our own team. The company that designs your window treatments also measures and hangs them.
  • Local for 30+ years. A family-owned Kansas City business since 1995, with a 4.9-star rating from 1,500+ Google reviews.

How It Works

1

Consultation

Visit a showroom or book an in-home visit, and we’ll bring fabric samples to hold against your own windows.

2

Design and measure

We choose curtains or drapery, lining, length, and hardware with you, then take final measurements.

3

You get a written proposal for every window, and everything is made to order once you approve it.

4

Install

Once everything arrives, we call to schedule, hang the hardware and panels, and show you how it all works.

Curtains vs Drapes FAQs

What is the difference between curtains and drapes?

Curtains are usually lighter, unlined panels in standard sizes with a rod pocket, grommet or tab top. Drapes are lined, pleated, and made to the exact window, so they hang fuller and block more light. Many people use the two words interchangeably.

Usually, yes. Drapery uses more fabric, adds lining and sewn pleats, and often needs a traverse rod or track. We give you a written proposal for every window, so you can compare options before you decide.

Traditionally, windows were dressed with three types: a sash curtain to filter light, a draw curtain to block it, and a decorative over-drapery. Today we’d call those sheers, working drapery, and stationary side panels.

In the US, both words are everyday terms, and plenty of people use them for the same thing. Designers and workrooms tend to say drapery for lined, pleated panels and curtains for lighter, simpler ones.

Yes. A custom curtain is made to your window’s exact width and length, in the fabric you choose. If you also want lining, pleats, and a fuller hang, that’s custom drapery.

Drapes, in most cases. Blackout-lined drapery mounted high and wide blocks far more light than unlined curtains. For the darkest room, layer it over a blackout shade.

See Curtains and Drapery Side by Side

The easiest way to decide is to see both in person. Visit our showrooms in Overland Park, Shawnee, or Lee’s Summit, or book an in-home visit anywhere in the metro, including the Northland, and we’ll bring samples to your windows. Explore our custom drapery options, then let us help you settle custom curtains vs custom drapery for every room in your home.