Blackout Curtains: The Complete Guide

Do blackout curtains really make a room dark? Yes, when they're made and hung the right way. We design custom blackout curtains for Kansas City bedrooms, nurseries, and media rooms, with a sewn blackout lining and hardware planned to stop light at the edges, where most blackout curtains fail. Our team measures, makes, and installs every panel, so the room stays dark from edge to edge.

Blackout Curtains vs Room Darkening vs Light Filtering

These three labels describe how much light gets through the fabric itself. None of them describe the edges, which we cover in the next section.

Blackout
Room darkening
Light filtering
Blackout Room darkening Light filtering
Light through the fabric Almost none Most is blocked; a soft glow remains Softened, still bright
Best for Bedrooms, nurseries, media rooms, day sleepers Living rooms and bedrooms where some glow is fine Living spaces where you want daylight and privacy
Privacy at night Full Full Partial; shapes can show with lights on

If you want the same comparison for shades, see our guide to blackout shades vs room darkening.

How Blackout Curtains Are Made

There are three common ways to make fabric block light, and they wear very differently:

  • A separate sewn blackout lining. This is how we make custom blackout curtains. The lining is its own layer, so it can be any face fabric you choose, and it can be replaced if it ever wears out.
  • Triple-weave blackout fabric. A dense weave with a dark yarn in the middle. It’s common in ready-made panels. It blocks a lot of light, but your choice of colors and textures is limited.
  • Foam or acrylic-coated backs. A coating sprayed on the back of the fabric. It’s inexpensive, but coatings can crack, flake, or hold a chemical smell as they age.

A lined blackout curtain also lasts longer because the lining takes the sun instead of your face fabric.

Why Blackout Curtains Still Let Light In

If your blackout curtains glow evenly across the fabric, the fabric isn’t true blackout. If they’re dark in the middle with bright lines around them, the fabric is fine and the problem is how they’re hung. That second case is far more common, and every gap has a fix:

Where light leaks
Why it happens
How we fix it
Where light leaks Why it happens How we fix it
Sides The rod is barely wider than the window Extend the rod 6 to 15 inches past the frame on each side, and add returns so the fabric wraps back to the wall
Top Light spills over the rod, especially with grommet tops Mount higher and closer to the wall, use a pleated heading instead of grommets, or add a cornice or valance
Center The two panels meet but don't overlap Use a traverse rod or track with overlapping master carriers
Bottom Panels stop short of the floor Make them floor length, or with a slight break, so the hem rests on the floor

Grommet tops are one of the worst offenders. The rings hold the fabric away from the wall, and light pours over the top. That’s one reason we make blackout curtains with pleated or Ripplefold headings; see our guide to custom drapery styles.

Raising the rod to stop the top gap only works if the curtains are long enough. Ready-made panels often end up too short once the rod moves up, which is where made-to-measure length pays off.

Do Blackout Curtains Keep Heat Out?

They help, but blocking light and blocking heat are two different jobs. The U.S. Department of Energy reports that medium-colored draperies with white-plastic backings can reduce heat gain by 33% when they’re closed on sunny windows. In winter, closed draperies can cut heat loss from a warm room by up to 10%.

Three things decide how much heat your blackout curtains actually stop:

  1. Timing. Close them before the sun hits the glass. Once the room has warmed up, curtains only slow the cooling.
  2. The edges. Warm air circles around gaps at the top and sides, the same gaps that leak light. A cornice and returns to the wall help with both.
  3. The lining color. A white or light lining facing the glass reflects more of the sun’s heat back outside.

Thermal Curtains for Kansas City Summers and Winters

Kansas City averages about 46 days a year at 90°F or higher, and July highs average near 90°F. West-facing bedrooms and great rooms take the hardest sun in the late afternoon. In winter, older homes with original windows lose heat through drafts.

That’s where a thermal lining or interlining earns its place. It adds a soft insulating layer between the face fabric and the blackout lining, so one curtain handles light, summer heat and winter drafts. For more ways to beat the summer sun, read our guide to heat-blocking window treatments.

Hardware for Heavy Blackout Drapes

Blackout lining adds weight, and interlining adds more. Hardware that’s too light is why so many blackout drapes sag in the middle or drag when you pull them.

  • Center supports: rods spanning more than about 48 inches need a support in the middle.
  • Traverse rods: a corded traverse rod opens and closes the panels without pulling on the fabric. The Kirsch Architrac corded rod carries up to 80 lb on a one-way draw.
  • Overlapping master carriers: the two panels overlap at the center, so no line of light shows down the middle.
  • Motorized tracks: handy for tall windows, or for closing every bedroom curtain on a schedule.

The Darkest Setup: Layer a Blackout Shade Under Blackout Drapery

For true total darkness, we pair two layers. A blackout shade mounted close to the glass blocks the window itself, and blackout drapery over it covers the edges and adds warmth. Each one covers the other’s gaps. See our blackout blinds and shades and blackout shades for bedrooms.

If you have plantation shutters, blackout drapery panels can hang over them too. Our guide to styling plantation shutters with curtains shows how to clear the louvers.

Blackout Curtains in Kansas City Homes

  • Early summer sunrises: in late June the sun is up before 6 am, which wakes kids and light sleepers long before the alarm.
  • Night-shift workers: nurses, first responders, and others who sleep during the day need a room that stays dark at noon.
  • Nurseries: blackout curtains help naps last, and a cordless or motorized setup keeps cords out of reach.
  • Media rooms and home offices: blackout drapery kills screen glare on west-facing windows.
  • Streetlights and headlights: bedrooms facing the street often need blackout more at night than in the morning.
  • Older homes in Brookside, Waldo and the Northland: thermal-lined blackout curtains help with drafty original windows.

What We Check Before Recommending Blackout Curtains

  1. When you need the room dark: daytime sleep, early mornings, or evenings only.
  2. Which way the window faces: east windows need blackout for sunrise, west windows for afternoon heat.
  3. Wall space around the window: room to extend the rod past the frame and stack the panels.
  4. Ceiling height: how high we can mount to close the top gap.
  5. What’s already on the window: a shade or shutters we can layer with, or an existing headrail to clear.
  6. Outlets and controls: whether motorized blackout drapery makes sense.

Our team is led by Brandon Roellchen, president and second-generation owner of our family business, which has been designing windows across Kansas City since 1995.

What Affects the Cost of Custom Blackout Curtains

  • Size: wider and taller windows need more fabric and lining, and floor-to-ceiling panels use the most.
  • Lining: blackout lining alone, or blackout plus a thermal interlining.
  • Face fabric: fabric price and pattern repeat change the yardage cost.
  • Heading and fullness: pleated headings and fuller panels use more fabric.
  • Hardware: a simple pole, a traverse rod, a track or a motor.
  • Layering: adding a blackout shade underneath for total darkness.

After measuring, we give you a written proposal for every window. For typical ranges, see our window treatment cost guide.

Warranty and Service

Why Choose One Stop for Blackout Curtains

  • We fix the edges, not just the fabric. We plan rod width, mounting height, returns and overlap so light doesn’t sneak around your curtains.
  • One plan for the whole window. We design the blackout curtain, the shade under it, and the hardware together.
  • Measured and installed by our own team. The company that designs your blackout curtains also measures and hangs them.
  • Local for 30+ years. A family-owned Kansas City business since 1995, with a 4.9-star rating from 1,500+ Google reviews.

How It Works

1

Consultation

Visit a showroom or book an in-home visit, and we’ll bring blackout samples to hold against your own windows.

2

Design and measure

We choose the fabric, lining, heading, length, and hardware with you, then take final measurements.

3

Proposal and order

You get a written proposal for every window, and your curtains are made to order once you approve it.

4

Install

Once everything arrives, we call to schedule, hang the hardware and panels, and check every edge for light leaks.

Blackout Curtains FAQs

Do blackout curtains keep heat out?

Yes, when they’re closed before the sun hits the window. The U.S. Department of Energy reports that medium-colored draperies with white backings can cut heat gain by 33%. A light lining facing the glass and fewer gaps at the edges help even more.

Usually the light comes around the edges, not through the fabric. A rod that’s too short, a gap above the rod, panels that don’t overlap in the middle, or curtains that stop short of the floor all let light in. Each one can be fixed with a wider rod, a higher mount, overlapping carriers or longer panels.

They’re heavier than regular curtains, so they need sturdier hardware. Coated backs can crack or smell as they age, and closed blackout curtains also block daylight you might want. A sewn lining and a traverse rod solve most of these problems.

A blackout lining is a separate layer sewn behind the face fabric, and it’s what makes most custom blackout curtains work. It lets you use almost any fabric you like and still darken the room. Ready-made blackout curtains often use a coated back or a triple-weave fabric instead.

Blackout shades, cellular shades with blackout fabric, and plantation shutters can all darken a room. For the darkest result, layer a blackout shade under blackout curtains. Shutters with blackout drapery over them work well too.

For many families, yes. A dark room makes daytime naps and early summer mornings easier. Choose cordless or motorized controls so there are no cords within a child’s reach.

Choose blackout if you sleep during the day, have a nursery or media room, or wake with the sun. Room darkening is enough for most living rooms and for bedrooms where a little glow doesn’t bother you.

Find Your Blackout Curtains in Person

The best way to judge darkness is to see it. Visit our showrooms in Overland Park, Shawnee, or Lee’s Summit, or book an in-home visit anywhere in the metro, including the Northland, and we’ll hold samples up to your own windows. Explore our custom drapery, then let us design blackout curtains that keep your room dark from edge to edge.