Custom Drapery in Kansas City
Wondering if custom drapery is worth it for your windows? In most rooms, yes. Custom drapery is cut to your exact window, lined for the light and privacy you want, and hung on a rod built to carry its weight, so it closes all the way and hangs straight for years. At One Stop Decorating, we design, measure, and install custom drapery in Kansas City homes, using Carole Fabrics (a Hunter Douglas partner company) and Drake, with hardware from Kirsch, Aria, Select, and Carole.
Why Kansas City Windows Need More Than Store-Bought Panels
Off-the-shelf panels come in a few stock widths and lengths. Kansas City homes don’t. Here’s what we run into most often:
- West-facing great rooms. Back patios and family rooms that face west take direct sun from mid-afternoon until sunset. A lined drapery panel cuts that glare and protects floors and furniture, especially paired with a shade underneath.
- Older homes in Brookside, Waldo and the Country Club District. Many were built between the 1920s and 1950s, with plaster walls, original wood trim, and windows that aren’t quite square. We mount rods into the header or studs, not just plaster, and size each panel to the actual opening.
- Two-story rooms in Johnson County and Lee’s Summit. Tall walls of glass need panels long enough to reach the floor and hardware strong enough to carry them. Stationary side panels up high, working drapery down low, is a common fix.
- Hot summers and cold winters. Kansas City sees about 46 days a year at 90°F or more, and January lows near 22°F. A thermal or interlined panel helps on both ends, especially on drafty original windows.
- Sliding patio doors. Drapery has to stack fully clear of the door so you can walk through it every day.
What Goes Into Our Custom Drapery
Every set is built from four choices: fabric, style, lining, and hardware. Here’s what each one does for you.
Fabrics From Carole and Drake
Most of our drapery is made by Carole Fabrics, a Hunter Douglas partner company with its own drapery workroom. You can choose from more than 4,000 fabric and color combinations, including Carole Exclusives, in solids, textures, and patterns. That’s why searches for Hunter Douglas draperies usually lead here.
Not sure about a color? Bring the samples home and look at them in your own light, at the time of day you’ll use the room most. A fabric that looks warm in the showroom can read gray on a north window.
Pleats and Styles
The top of the panel, called the heading, sets the whole look:
- Pinch pleat: tailored and classic, great in formal living and dining rooms.
- Euro and Carole’s Olivia pleat: pinched at the very top so the fabric relaxes below, a good middle ground between traditional and modern.
- Inverted and tuxedo pleat: a flat, structured face, often used for stationary panels and patterned fabric.
- Ripplefold: soft, even waves that glide on a track, ideal for wide glass and motorized drapery.
- Grommet and rod pocket: casual looks for panels you rarely close.
Want to see every option side by side? Read Custom Drapery: Design Possibilities.
Linings for Light, Privacy and Insulation
- Privacy lining: protects the face fabric from sun and gives a fuller hang. Good for living and dining rooms.
- Blackout lining: for bedrooms, nurseries and media rooms. To keep light from sneaking around the edges, we also plan rod width and returns. More in our Blackout Curtains guide.
- Thermal lining or interlining: a soft layer between fabric and lining that adds body, quiets the room, and helps against winter drafts.
Sizes and Fullness
Every panel is made to your measured width and length. For a full, rich look, pleated drapery uses about 2 to 2.5 times the window width in fabric, and Ripplefold about 2 times. Store-bought panels often have far less, which is why they look flat when closed.
You also choose how the hem meets the floor: just kissing it, a slight break, or a soft puddle. Wide openings aren’t a problem. Kirsch Architrac track can run up to 360 inches in one piece.
Rods, Tracks and Hardware
The rod is part of the design, and it has to carry the weight of lined fabric. We carry four lines:
- Kirsch: Estate decorative traverse rods in 1-3/8″ and 2″ diameters, in metal and wood finishes, plus heavy-duty Architrac track rated for up to 80 lb of drapery (64 lb motorized).
- Aria: clean, modern metal poles in 1-1/8″ and 1-3/8″ diameters, including traversing and battery-powered options.
- Select: wood rods in 13 finishes and metal collections, with heavy-duty traverse rods built for blackout-lined and interlined drapery.
- Carole: drapery hardware from Carole, so your rod and fabric can come from the same maker.
Small details matter too. On longer rods, a center support keeps the rod from sagging under lined fabric, and a baton lets you open panels without pulling on the fabric.
How You Open and Close It
- By hand, with a baton or wand.
- Cord-draw traverse rod, so panels open evenly with one pull.
- Motorized, with Kirsch AMP motors on Estate rods and Architrac track. Tug the panel and the motor finishes the move. If the power goes out, the motor releases so you can still open the drapery by hand.
You can also layer drapery over a motorized Hunter Douglas shade, so the shade handles daily light and the drapery frames the window.
Window Drapery for Sliding Glass Doors
For patio doors, we usually make the drapery draw one way so the whole stack sits beside the door, not in front of it. Ripplefold on a track works especially well here because it opens with a light push and stacks tightly. See more ideas on our sliding door window treatments page.
How Long It Takes
Your drapery is made to order after we take final measurements in your home. Once everything arrives, we call you to schedule installation.
Custom Curtains or Custom Drapery?
If you searched for custom curtains in Kansas City, you’re in the right place. People use the words interchangeably, but in our world, curtains are usually lighter and unlined, while drapery is lined, pleated, and made to your exact size. Most homeowners asking for custom curtains end up loving custom drapery. Here’s the full breakdown: Custom Curtains vs Custom Drapery.
What Your Designer Checks in Your Home
Great drapery starts with a careful visit. During your consultation, your designer will:
- Measure the window, the wall around it, and the ceiling height.
- Find solid mounting points (header or studs), which matters with plaster walls in older homes.
- Plan stack-back space so open panels don’t block the glass or the view.
- Note vents, outlets, window cranks, and furniture that panels have to clear.
- Check which way the window faces and when the sun hits it, to choose the right lining.
- Ask how often you’ll open the panels, then match the rod and control to that.
- Choose the length (kiss, break, or puddle) for your floors and pets.
Who’s behind it. We’re family-owned and have served Kansas City since 1995. Brandon Roellchen, our president and second-generation owner, likes to say our team does “the common things uncommonly well,” and with drapery that means getting the measurements, mounting, and hang exactly right.
How Much Does Custom Drapery Cost in Kansas City?
Your price comes down to a few things:
- Fabric. Price per yard varies widely, and patterned fabric uses extra yardage to line up the repeat.
- Width and fullness. Wider windows and fuller pleats take more fabric.
- Length. Floor-to-ceiling panels in a two-story room use far more fabric than a standard window.
- Lining. Blackout and interlining add material and sewing time.
- Hardware. A decorative traverse rod or track costs more than a simple pole.
- Motorization. Adds a motor and controls.
We’ll give you a written proposal after measuring, so you know exactly what each window costs before you order.
What's Guaranteed
- Kirsch hardware: a 10-year warranty on Kirsch drapery hardware (products made after July 1, 2018, using all-Kirsch parts).
- Hunter Douglas shades layered under your drapery: the Hunter Douglas Lifetime Limited Warranty, which covers defects in materials and workmanship for as long as you own them. Motorized parts are covered for 5 years.
- Local help when you need it: if something needs attention later, call your nearest showroom and our team will help.
Why Kansas City Homeowners Choose One Stop for Drapery
- Fabric, hardware, shades, and installation in one order. You don’t have to coordinate a fabric store, a workroom, and an installer. We design the drapery and the shade underneath it together.
- Our own installers. Our own installation team hangs every set and shows you how everything works.
- Three showrooms, plus in-home visits. See fabric samples and hardware in person in Overland Park, Shawnee, or Lee’s Summit, or we’ll bring them to your home anywhere in the metro, including the Northland.
- 30+ years in Kansas City. Family-owned since 1995, with 1,500+ Google reviews and a 4.9-star rating from neighbors across the metro.
- No-pressure design. Our reviews mention it again and again: take your time, bring samples home, and decide when you’re ready.
How It Works, From Consultation to Install
- Consultation.
Visit a showroom or book an in-home visit. We bring fabric samples and talk through how you use the room. - Measure.
Your designer takes final measurements and checks mounting points, clearances, and stack-back. - Proposal and order.
You get a written proposal for every window. Once you approve it, your drapery is made to order. - Install.
Once everything arrives, we call to schedule. Our installer hangs the hardware and panels and shows you how everything works. - Follow-up.
We’re a phone call away if anything needs adjusting.
Want to See Custom Drapes Near You First?
Stop by one of our showrooms in Overland Park, Shawnee, or Lee’s Summit to see drapery fabrics and hardware in person. Live north of the river? We bring the samples to your home in Liberty, Gladstone, Parkville, and across the Northland. We serve homeowners across the Kansas City metro on both sides of the State Line.
Custom Drapery FAQs
How long does custom drapery take?
Your drapery is made to order after we take final measurements in your home. Once everything arrives, we call you to schedule installation.
Is custom drapery worth it compared to store-bought curtains?
For rooms you use every day, usually yes. Custom panels are made to your exact size with enough fullness to look rich when closed, a quality lining, and a rod rated for the weight. For a rental or a quick fix, store-bought can make sense.
Can custom drapes be motorized?
Yes. We motorize drapery with Kirsch AMP motors on decorative rods and tracks. You can still open it by hand, and the motor releases if the power goes out.
Can I put drapery over plantation shutters or blinds?
Yes, and it’s one of the most popular looks in Kansas City. We plan the rod height and projection so panels clear the shutter or blind. See our guide to styling plantation shutters with curtains.
Do custom drapes help with heat and cold?
They can. A thermal lining or interlining adds insulation at the window, and closing lined drapery before the afternoon sun hits keeps rooms cooler. For the most energy savings, pair drapery with an insulating shade.
Can I see fabrics before I order?
Yes. Visit one of our showrooms in Overland Park, Shawnee, or Lee’s Summit, or we’ll bring samples to your home anywhere in the metro, including the Northland. We recommend looking at samples in your own room at the time of day you use it most.
What is the average cost of custom drapery?
Price depends mainly on fabric, window size, lining, and hardware. After measuring, we give you a written proposal that lists every window. See our window treatment cost guide for more.
Let's Design Your Drapery
Bring us a photo of your room, or let us come to you with samples. We’ll measure, help you choose a fabric, style, and lining, and give you a clear written price for every window. Book your consultation today and see why so many neighbors trust One Stop for custom drapery in Kansas City.